Landlords and property managers working in a town the size of Landmark deal with a specific kind of electrical problem: the kind that comes with older housing stock, undocumented add-on circuits, and tenants who need power restored quickly. A dead outlet in a rental unit, a panel that has been modified by a previous owner, or a circuit that trips under a load nobody planned for are all calls we take regularly. You get a price before anything is scheduled, and the work is explained at every step.
We handle residential and commercial electrical work in Landmark and the surrounding Pulaski County area. Whether you manage a single rental property or a portfolio of units, or you own the home yourself, we cover the repairs, panel work, wiring, and installations that keep the circuits running the way they should.
Some electrical work in a place like Landmark requires a permit before it starts. Panel replacements, service upgrades, new circuit installations, and wiring for additions or outbuildings are the jobs most likely to fall into that category. Smaller repairs, outlet replacements, and fixture swaps generally do not, but the line depends on the scope of the work and the jurisdiction it falls under.
We handle the permit side of jobs that require one. That means filing before the work starts and scheduling an inspection when the work is done. It also means the timeline for a permitted job is slightly different from a repair: there is a window between filing and approval, and the inspection has to happen before the panel or wiring is closed up. We walk through what applies to your job on the call so there are no decisions to make under pressure once the visit is underway.
Properties in and around Landmark sometimes rely on well pumps for water supply, and a pump that loses power or trips its breaker is not a problem that waits. The electrical side of a well pump installation covers the dedicated circuit from the panel, the disconnect, and the wiring to the pump itself. Irrigation systems draw their own load and need circuits sized for the equipment, not shared with other loads that compete for the same breaker. If the panel does not have capacity for a new pump circuit or an irrigation controller, that conversation happens first.
An older home that has been added onto over the years often has a panel where the labeling does not match the circuits anymore, or never did. That makes troubleshooting slower and any new work harder to scope correctly. Panel labeling and circuit identification involves testing every circuit, mapping what it actually feeds, and updating the directory so the panel reflects the real wiring. It is a straightforward job on its own, and it is worth doing before any larger project starts.
Installing a ceiling fan where no fan existed before means more than hanging the fixture. The existing box has to be rated for the weight and motion of a fan, not just a light. If it is not, we swap it for a fan-rated box before the fan goes up. Where no circuit exists at all, we run one. Replacement fans are more straightforward, but we still confirm the box before the new unit is mounted. Getting that detail right at the start means the fan does not work loose over time.
A safety inspection covers the panel, the wiring, the outlets, and the visible components throughout the property. For a landlord preparing a unit between tenants, it is a way to confirm what is there and catch anything that needs attention before the next occupant moves in. For a buyer or seller, it provides a written summary of what the electrical system contains and where it stands relative to current standards. Grounding and bonding, GFCI and AFCI protection, and the condition of the service entrance are all part of what the inspection covers. We explain what we find before recommending any follow-up work. Honest recommendations on repairs, never an upsell, is how every inspection runs. What the work involves is covered on our full list of electrical services.
You shouldn't have to chase an electrician for answers, and the price is the first thing you should have a straight answer on. When you call, we ask what is happening and where. From that, we give you a price before the visit is scheduled.
What moves a quote is what the job actually turns out to involve once someone is on site. The fault that looked like a single outlet may trace back to a wiring connection deeper in the wall. A panel that looks like it has room for a new circuit may need a breaker replaced before the new one can go in. What has to be opened up to reach the problem, what the existing circuit can carry, and whether the panel needs any attention before new work is added are the things that can change the scope. If that happens, we explain it before we proceed. The price is not expanded without telling you first.
Calling is the way to get a quote. We discuss the job on the phone, confirm what it covers, and settle the price before anything is scheduled. Book the visit. Know the scope. Know the price before it starts.
Call (501) 746-6282.
We are available every day from 8:30 AM to 10:00 PM. Tell us what is going on, and we confirm availability and price on the same call.
For landlords and property managers, we understand that a unit with a wiring problem has a tenant in it, and the tenant has a schedule. We work around occupied properties. That means confirming the visit time, not showing up in a window that requires someone to wait all day, and explaining what the work involves so the tenant knows what to expect.
For problems that will not keep, we take short-notice calls during business hours. A sparking outlet, a burning smell with no obvious source, or a panel that is warm to the touch are all situations where the circuit should be shut off and a call placed without delay. We walk through what you are seeing on the phone and help you understand what needs to happen before we arrive.
Some electrical problems are consistent and easy to trace. Others only show up under specific conditions: a breaker that trips when a particular appliance runs, a light that flickers only when it rains, a circuit that holds fine at low load and fails when the demand goes up. These are the faults that take longer to find because they cannot be reproduced on demand.
A fault that only appears under load or in wet weather points to something different from a fault that is always present. Moisture intrusion into an outdoor junction box, a wiring connection that is borderline and fails when the circuit heats up, or a breaker that is rated correctly but has weakened over time are all possibilities. Finding the cause means testing under the conditions that produce the symptom, not just checking the obvious points when the fault is not active.
We trace the circuit from the panel to the point of failure, test under load where the symptom requires it, and check grounding and bonding where a fault might be masked by a path to ground that is not where it should be. Arc-fault and ground-fault breakers add a layer of protection that a standard breaker does not have, and they also give more information about where the fault is occurring. Electrical work here is done to the code this area actually enforces, which means the fix addresses the actual problem rather than the symptom.
We cover Landmark and the communities around it. That includes East End, Shannon Hills, Wrightsville, Sweet Home, and Woodson, as well as the broader Pulaski County area. If your property is nearby and you are not sure whether your address falls within our range, call and ask. We confirm coverage on the call.
We take calls from homeowners, landlords, commercial property owners, and anyone else who needs electrical work handled in this part of the county. The scope of the job does not change based on where in the service area it is located. Simple scheduling. Pricing agreed up front. Power back fast.
Older rental housing tends to show up with panels that have been modified over the years without documentation, outlets that are missing ground-fault protection in kitchens and bathrooms, and circuits that were not sized for the loads modern tenants typically run. Wiring that has been added onto informally is also common, and it often does not show up until something trips or fails. A safety inspection before a new tenancy is the straightforward way to find out what is actually there.
Call us as soon as the gap is confirmed and we will work through what can be scheduled in the available window. Having a clear list of what needs to be done and access to the property from the start of the gap gives the most room to work.
We discuss scheduling when you call and confirm what times work for the property. If your business has hours where electrical work would be disruptive, we work through what the options are and confirm availability before booking.
We are available every day from 8:30 AM to 10:00 PM.
If the call comes in during those hours, reach us at (501) 746-6282 and we will talk through what the tenant is seeing.
For a situation that involves a sparking outlet, a burning smell, or a panel that feels warm, the circuit should be shut off at the breaker until the visit. We walk through that on the phone so the right steps are taken before we arrive.
Yes. We assess what has been done, confirm it is correct, and complete the work from where it stands. If something in the existing work needs to be corrected first, we explain that before proceeding.
A new appliance with a higher draw may need a larger circuit than the one already in place. We check the breaker size, the wire gauge, and the outlet type against the new appliance's requirements before connecting it. If the existing circuit is undersized, we replace it as part of the same job.
We cover Landmark and the surrounding communities, including East End, Wrightsville, Shannon Hills, Sweet Home, and Woodson, as well as the broader Pulaski County area.
If you are not certain whether your address is in our service area, call (501) 746-6282 and we will confirm it on the call.
In many cases, yes, though there will be periods when parts of the home are without power. We discuss the sequence of the work and what each phase involves so you can plan around the disruptions. The specifics depend on the size and layout of the property.
We answer, we turn up, and we explain what we find. That is the whole process.
Call (501) 746-6282 and tell us what is happening.
We are available every day from 8:30 AM to 10:00 PM. The price is settled on the call, and the work does not start until you know what it covers. We'll take care of the circuits from here.
Other towns where we take electrical work: East End, Shannon Hills, Alexander, North Little Rock.
Below is a plain-language look at the electrical work we handle in Landmark and across Pulaski County. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. If a job spans more than one category, we scope the full picture on the phone before anything is scheduled.
| Service Type | What It Covers | Best For | What to Keep in Mind |
|---|---|---|---|
| Electrical Panel & Service Upgrades | Load calculation and service sizingFull panel replacementService-entrance workSubpanel installation | Homes adding EV chargers, generators, or appliances that push current panel capacity | A 100-amp panel that was adequate years ago may not carry today's AC load plus an EV charger. We confirm the numbers before ordering equipment. |
| Outlet & Switch Installation | GFCI and AFCI outlet upgradesAdditional outlet runsDimmer and smart switch wiringWeatherproof outdoor outlets | Rooms that are short on outlets or missing required safety protection | Kitchens, bathrooms, garages, and outdoor areas are required to have GFCI protection. We flag any gaps during the visit. |
| Whole-Home Surge Protection | Panel-level surge device installationProtection for all circuits at oncePost-storm voltage spike defenseAppliance and electronics coverage | Any property in an area with regular lightning activity or utility restoration spikes | A power strip protects one outlet strip. A panel-level device protects every circuit in the building. We install it at the main panel and explain what it covers. |
Call (501) 746-6282 and we will talk through the job, confirm what it involves, and give you a price before anything is put on the schedule.
(501) 746-6282