Most people do not call an electrician until something stops working. The jobs that actually matter most are the ones that prevent that moment: a panel that cannot carry the current load, wiring that has never been inspected, a circuit that has been overloaded for years without tripping anything. Those are electrician jobs, not handyman jobs, and getting them right the first time is what keeps a home or building safe to use.
We handle residential and commercial electrical work across Cabot and the surrounding area. That covers everything from a single outlet that stopped working to a full panel replacement, new circuit installation, whole-home rewiring, EV charger hookups, and backup generator connections. Flickering lights and warm outlets are warning signs, not quirks. When you call, you get a straight answer about the work, a price before anything is scheduled, and a visit that covers what was agreed. We are available every day from 8:30 AM to 10:00 PM.
From a single GFCI outlet to a whole-home rewire, the first step is the same: you call, describe what is happening, and we work out what the job involves before anything else. The price is confirmed on that call. You know what the work covers and what it costs before we arrive, so there are no decisions to make under pressure once the visit is underway.
We are open every day from 8:30 AM to 10:00 PM, including weekends. If something comes up on a Saturday evening or a Sunday morning, you do not have to wait until the week starts to get a quote or get on the schedule. Short-notice calls are taken during those hours, and we will tell you on the phone what is available when you ask.
Some electrical problems will not wait for a convenient window. A sparking outlet, a burning smell near a panel, or a complete loss of power to part of a building warrants a call without delay. When you reach out with an urgent situation, we walk through what you are seeing on the phone and help you understand whether a circuit should be shut off before we arrive.
For businesses that need to stay open and rental properties where a tenant is present, access and timing are part of the conversation when you call. We confirm what the visit involves, who needs to be there, and what to have accessible before we schedule. That keeps the visit efficient and limits the disruption to whoever is using the space.
Landlords and rental property owners in Cabot deal with a specific set of electrical concerns. A tenant reports a dead outlet or a tripping breaker. The owner needs it handled, documented, and closed without a long back-and-forth between the parties. We work with that arrangement directly.
When access is through a tenant, we confirm the visit details with whoever is booking and make sure the tenant knows what to have accessible. After the work is done, we can explain what was found and what was repaired in terms that work as a record. For an owner who wants to know the condition of a property's wiring before a new tenancy or before a sale, an electrical safety inspection covers the panel, the outlets, the visible wiring, and the grounding, with a clear summary of what we find.
Honest recommendations on repairs, never an upsell, is how we approach every job on a rental property. If a repair is the right answer, that is what we say. If the panel or wiring needs more attention than a single repair covers, we explain why before any work is scheduled.
A panel that was sized for a smaller load than the home now carries is one of the most common reasons for repeated breaker trips, flickering lights under load, and circuits that cannot support a new appliance. The region this area sits in puts sustained demand on electrical systems, with cooling loads through a long summer and the occasional storm-related outage that tests everything at once. A panel upgrade involves a load calculation, removal of the old equipment, and installation of a panel sized for current and anticipated demand, including room for circuits that may be added later. Where a detached garage, a workshop, or a second structure needs its own distribution point, a subpanel is the right answer.
Severe thunderstorms and ice storms move through this region with enough force to knock out power for extended periods. A panel-level surge protection device absorbs voltage spikes before they reach the circuits in the house, protecting appliances and electronics all at once rather than one outlet strip at a time. It is a single installation that covers the whole building.
The electrical side of a backup generator installation covers the transfer switch, the wiring from the generator connection point to the panel, and the circuits the generator will supply. The transfer switch is what keeps the generator isolated from the utility line during an outage. We handle the hookup and the switch installation, not the generator unit itself.
Cabot is a city with a mix of housing ages, and older homes sometimes carry wiring that has never been updated. Knob-and-tube replacement, aluminum branch-circuit wiring remediation, and whole-home rewiring are all jobs that come up when a home's original wiring has reached the end of its useful life or no longer meets current standards. GFCI and AFCI protection is part of the same conversation: kitchens, bathrooms, garages, and outdoor circuits all require it under current code, and homes built before those requirements were in place often do not have it.
For renovation work, additions, and new appliance circuits, we run dedicated circuits sized for the load, pull wiring from the panel to the point of connection, and confirm the panel has capacity before anything is added. Code-compliant wiring is the standard on every job, and we confirm what the work covers before scheduling.
Outdoor lighting work covers motion sensor lights, security lighting on garages and outbuildings, landscape lighting wiring along driveways and walkways, and weatherproof circuits for patios and exterior walls. We run circuits rated for outdoor use, install junction boxes that handle moisture and physical exposure, and test everything before the job is closed.
Recessed and LED lighting installation involves more than placing fixtures. Where no circuit exists, we run the wiring first. Where a circuit is already in place, we confirm it can carry the added fixtures before anything is connected. Ceiling fan installation falls under the same scope. A room that never had a fan needs a fan-rated box and a circuit. A replacement fan needs the existing box checked before the new unit goes up.
A Level 2 EV charger runs on a dedicated 240-volt circuit with a breaker sized for the charger's draw. We check panel capacity first, run the circuit from the panel to the mounting location, and install the wiring for the charger. If the panel does not have room for the added load, that conversation happens before the circuit is pulled.
Grounding and bonding issues often go unnoticed until something else in the system is inspected. A home with older wiring may have outlets that are not grounded, a panel with bonding that does not meet current requirements, or circuits that were added without proper grounding throughout. These are not cosmetic problems. We identify what is out of compliance, explain what the correction involves, and bring it into line. Start with the services page if you want the detail before the call.
Choosing the right electrical fix is easier than it sounds once the job is actually scoped. The price for any job is worked out on the call, based on what you describe and what the work involves. What moves a quote is what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change. A panel upgrade involves different work than a single outlet replacement, and the quote reflects that.
We do not quote a number and then expand the scope without telling you. If the visit turns up something we could not know about from the call, we explain it before we proceed. You get the price before we schedule, and if anything changes, you hear about it first. Simple scheduling. Pricing agreed up front. Power back fast.
Call (501) 746-6282 to get a price on the job.
Not every electrical problem in a home originates inside it. The utility owns the service entrance up to the meter, and a fault on that side of the line is theirs to repair, not ours. Working out which side a fault sits on is part of what we do when the symptoms are not immediately explained by anything inside the panel or the circuits.
If the problem turns out to be on the utility's side, we tell you that directly and explain what to report to them. We do not bill for work we did not need to do, and we do not leave you without a clear next step. Where the fault is on our side of the meter, we scope the repair and confirm the price before anything is opened up.
We take calls from throughout Cabot and Lonoke County. That includes Austin, Ward, Jacksonville, Beebe, and El Paso. If you are in the area and not sure whether your address falls within our range, call and ask. We will confirm it on the call.
Coverage is not limited to any one part of the county. Residential and commercial calls are both taken, and the process is the same regardless of property type: the job gets scoped on the phone, a price is confirmed, and the work is scheduled.
Older homes in Lonoke County commonly have panels that were sized for a smaller load than the home now carries, wiring that has never been updated, and outlets that lack GFCI or AFCI protection. Knob-and-tube wiring and aluminum branch-circuit wiring show up in homes built before the 1980s. If your home has never had an electrical inspection and was built before that period, a safety inspection is a practical starting point.
Yes. We take calls from business owners, landlords, and property managers across Cabot and Lonoke County. The process is the same as for a residential job: the work is scoped on the call, a price is confirmed, and the visit is scheduled. For rental properties where access goes through a tenant, we work out the access and timing details when you book.
Whether a permit is required depends on the type of work and where it is located on the property. Some repairs do not require one. Panel replacements, new circuit installation, and wiring work typically do. We confirm what applies to your specific job before scheduling, so the work is done correctly and can be inspected if required.
We are available every day from 8:30 AM to 10:00 PM. If your commercial property needs work outside normal business hours within that window, call us and we will discuss what the schedule allows.
Panel work requires shutting off the main breaker, which takes the whole property off supply for the duration of the work. We walk through what that means for your household or business before we schedule.
A warm outlet, a breaker that keeps tripping, or a panel that hums when the AC runs are not problems that get better on their own. We handle the diagnostic work, the repair, and the follow-on wiring or panel work if the job calls for it.
Call (501) 746-6282, tell us what you are seeing, and we will take it from there.
We are available every day from 8:30 AM to 10:00 PM. We'll handle the wiring so you don't have to.
Also serving: Jacksonville, Gibson, Sherwood.
Below is a plain-language look at the electrical work we handle in Cabot and across Lonoke County. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. If a job spans more than one category, we scope the full picture on the phone before anything is scheduled.
| Service Type | What It Covers | Best For | What to Keep in Mind |
|---|---|---|---|
| Wiring & Circuit Installation | New circuit runs from the panelRough-in wiring for additionsKnob-and-tube and aluminum wiring remediationWhole-home rewiring | Older homes with wiring past its safe service life or additions needing new circuits | Aluminum branch-circuit wiring and knob-and-tube both require specific remediation approaches. We look at what is in the walls before recommending a path. |
| Dedicated Appliance Circuits | Circuit sizing for the specific applianceWiring from panel to connection pointBreaker installation and load confirmationDryer, range, oven, and hot tub circuits | Any high-draw appliance that needs its own circuit to operate safely | Sharing a circuit with a high-draw appliance creates heat at connections over time. A dedicated circuit sized for the equipment eliminates that risk. |
| Electrical Panel & Service Upgrades | Load calculation and service sizingFull panel replacementService-entrance workSubpanel installation | Homes adding EV chargers, generators, or appliances that push current panel capacity | A 100-amp panel that was adequate years ago may not carry today's AC load plus an EV charger. We confirm the numbers before ordering equipment. |
Call (501) 746-6282 and we will talk through the job, confirm what it involves, and give you a price before anything is put on the schedule.
(501) 746-6282